Cisco 300-175 DCUCI 問題練習

Question No : 1
Open the windows by clicking on the minimized at the bottom of the viewing area. Windows can be minimized by clicking on the [X], repositioned by dragging the title bar, and resized by using the handle at the lower right corner to customize the viewing area.
If you are required to access the devices to complete this scenario, the mouse cursor will use a hand symbol when moved over device icons. Clicking the icon will open a device terminal so you can interact with the hardware.
Open the Questions window and begin by clicking a question number. When you have completed answering all questions, click Done to continue.
Scenario
Use your UCS knowledge on Adapter errors.............................................configurations.



Current Adapter Connected Status is?
a. Operable
b. Down
c. Inoperable
d. Unknown

答えを確認する

正解: D

Question No : 2
Open the windows by clicking on the minimized title at the bottom of the viewing area. Windows can be minimized by clicking on the [-], repositioned by dragging the title bar, and resized by using the handle at the lower right corner to customize the viewing area.
If you are required to access the devices to complete this scenario, the mouse cursor will use a hand symbol when moved over device icons. Click the icon to open a device terminal to interact with the hardware.
Open the Questions window and begin with clicking a question number. When you have completed answering all questions, click Done to continue.
Scenario
Use your UCS knowledge on Fabric Interconnect Failover to answer the questions associated with the UCS cluster.



Which statements is true regarding the Fabric Interconnect Failover configuration changes?
a. High availability is being setup so that cluster a and b can both be subordinate or primary.
b. The fabric interconnect b changes from subordinate to primary.
c. High availability is setup so that fabric interconnect will keep a to be primary and b will be lead.
d. The Fabric interconnect can have lead states, so that b will switch to primary and a will stay primary.

答えを確認する

正解: B

Question No : 3
Open the windows by clicking on the minimized at the bottom of the viewing area. Windows can be minimized by clicking on the [X], repositioned by dragging the title bar, and resized by using the handle at the lower right corner to customize the viewing area.
If you are required to access the devices to complete this scenario, the mouse cursor will use a hand symbol when moved over device icons. Clicking the icon will open a device terminal so you can interact with the hardware.
Open the Questions window and begin by clicking a question number. When you have completed answering all questions, click Done to continue.
Scenario
Use your UCS knowledge on Adapter errors .............................................configurations.



We are working on which server?
a. 1
b. 2
c. 3
d. 4
e. 5

答えを確認する

正解: E

Question No : 4
What are the three main components of the VM-FEX environment? (Choose three.)
a. Red Hat Network Satellite server
b. ESX host with Cisco UCS M81KR VIC
c. ESX host with Cisco UCS M72KR CAN
d. VMware vCenter
e. VMware Update Manager
f. Cisco UCS Manager
g. Cisco VSG

答えを確認する

正解: BDF

Question No : 5
Which BIOS setting is required for a VMware ESXi 5.0 host to support Cisco VM-FEX universal pasthrough mode?
a. VT for Directed IO
b. ACPI 10 Support
c. VEMDPA Agent
d. Execute Disabled Bit
e. Processor C State

答えを確認する

正解: A

Question No : 6
Which three items represent message formats that are available to send fault data using Cisco Call Home? (Choose three.)
a. short text
b. long text
c. HTML
d. SOAP API
e. XML
f. Java

答えを確認する

正解: ABE

Question No : 7
Which two items represent the features of Call Home on the Cisco Unified Computing System? (Choose two.)
a. syslog
b. send fault details to Cisco TAC
c. SNMP trap receiver
d. send email alerts to administrators
e. central repository of normalized fault data

答えを確認する

正解: BD

Question No : 8
When cabling a Cisco UCS 6200 Series Fabric Interconnect to disjoint Layer 2 networks, which option must be considered?
a. The fabric interconnect must be in switching mode.
b. You must first configure a LAN pin group.
c. Each VLAN is allowed across multiple disjoint uplinks.
d. Each vNIC can communicate to a single disjoint network.

答えを確認する

正解: D

Question No : 9
Which options are valid port types when configuring fixed 10-Gb LAN interfaces on the Cisco UCS 6200 Series Fabric Interconnects? (Choose three.)
a. monitoring port
b. server port
c. uplink Ethernet port
d. FEX port
e. Fibre Channel storage port

答えを確認する

正解: ABC

Question No : 10
Which policy is used to update adapter firmware?
a. adapter policy
b. host firmware policy
c. management firmware policy
d. network control policy

答えを確認する

正解: B

Question No : 11
The Cisco UCS administrator has the chassis discovery policy set to "2-link". The administrator connects a new chassis to the Cisco UCS 6200 Series Fabric Interconnects using four links.
Which option about link utilization is true?
a. The Cisco UCS will use two links until the chassis is reacknowledged, after which it will use all four links.
b. The Cisco UCS will use all four links for discovery.
c. The Cisco UCS will use only two links. The other two links are unusable.
d. The Cisco UCS will use only two links. However, the administrator can manually pin traffic to the extra links by using service profiles.

答えを確認する

正解: A

Question No : 12
What is a true statement concerning automatic Fibre Channel pinning on a Cisco Unified Computing System 62XX Fabric Interconnect?
a. By default, uplink Fibre Channel interfaces are configured for VSAN trunking.
b. Using NPV, each downstream server will be pinned to an uplink port that is based on a PIN group.
c. The Fibre Channel pinning process is implemented differently than end-host MAC address pinning.
d. With VSAN trunking, the automatic pinning of server traffic to Fibre Channel uplink ports will be based on the server WWN.

答えを確認する

正解: D

Question No : 13
What is true statement concerning port personalities on the Cisco Unified Computing System 62XX Fabric Interconnect?
a. Fibre Channel uplink ports must operate in Fibre Channel switching mode.
b. The fabric interconnects use native FCoE storage ports to directly attach to the SAN infrastructure.
c. By default, all Fibre Channel ports are unconfigured.
d. The Fibre Channel uplink ports do not support VSAN trunking and Fibre Channel port channels.
e. The Fibre Channel storage ports support VSAN trunking and Fibre Channel port channels.

答えを確認する

正解: C

Question No : 14
Which two are true with respect to the switching modes on the Cisco Unified Computing System 62XX Fabric Interconnect? (Choose two.)
a. End-host mode presents a link to a northbound uplink switch as a host trunk with loop detection that is provided by STP.
b. For northbound traffic, server MAC addresses are statically pinned to an uplink; the return path is controlled by the unified fabric switches.
c. A fabric interconnect port in Ethernet switching mode appears to the uplink switch as a host with many MAC addresses.
d. Server-to-server traffic on a common VLAN are locally switched by the fabric interconnect and not the northbound switches.
e. A MAC forwarding table is not used to forward traffic to the uplink switch.
f. A MAC address forwarding table is maintained for server-to-server communications across VLANs.

答えを確認する

正解: DE

Question No : 15
Which two are true with respect to the unified ports on the Cisco Unified Computing System 62XX Fabric Interconnect? (Choose two.)
a. The port mode is automatically discovered after plugging in a LAN or Fibre Channel-attached cable.
b. By default, unified ports that are changed to Ethernet port mode are set to uplink Ethernet port type.
c. Ethernet ports must be grouped together in a block and must start with the first port and end with an odd numbered port.
d. Alternating Ethernet and Fibre Channel ports is supported on the expansion module.
e. After making port mode changes on an expansion module, the module will reboot.
f. In a standalone configuration, making port mode changes to the fixed module will not cause the fabric interconnect to reboot.

答えを確認する

正解: CE