70-735 実際試験問題と解答 - 模擬練習 - 受験自信を増やす

Question No : 1
You have an image of Windows 10. You plan to deploy the image to a new computer. You run sysprep.exe /generalize /oobe /shutdown, and then you capture the image. You deploy the image to the computer. You add an application and a driver to the online image.
You need to prepare the computer for the end user.
Which command should you run?

A.sysprep.exe /oobe
B.sysprep.exe /generalize /audit
C.dism.exe /Apply-Image
D.imagex.exe /capture

正解:
Explanation:
References: https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/boot-windows-to-auditmode-or-oobe

Question No : 2
You have a generalized image of the 64-bit version of Windows 10. The image is released to the Out-of-Box-Experience (OOBE).
You need to ensure that when the image is deployed to a computer, the computer starts in audit mode.
What should you do?

A.Create an answer file, and then copy the answer file to the image.
B.When the computer starts, press SHIFT+F10, and then run sysprep.exe /audit.
C.Create a provisioning package, and then copy the provisioning package to the image.
D.When the computer starts, press SHIFT+F10, and then run imagex.exe.

正解:
Explanation:
References: https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/boot-windows-to-auditmode-or-oobe

Question No : 3
HOTSPOT
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

正解:

Explanation:
References: https://dpcenter.microsoft.com/en/Windows/Build/cc-windows-10-v1607-Language-Interface-Packs https://technet.microsoft.com/en-us/windows/release-info.aspx

Question No : 4
DRAG DROP
You are building an image of Windows 10 for a new computer model. The computer uses specific out-of-box device drivers.
The Windows 10 image is stored in C:\OEM\Install.wim. Install.wim contains only one image named Windows.
The drivers are stored in the C:\Mydrivers folder on your management computer. The drivers are stored in the INF format.
You need to add the drivers to a new image in the Install.wim file.
Which three commands should you run in sequence? To answer, move the appropriate commands from the list of commands to the answer area and arrange them in the correct order.

正解:

Question No : 5
You have a Windows Recovery Environment (Windows RE) image. You make changes to applications, languages, and updates in the image. After the changes, the size of the image increases to 500 MB. You need to modify the deployment script to ensure that the recovery partition has the required amount of free space. The solution must minimize the space of the recovery partition.
To which size should you set the recovery partition?

A.550 MB
B.820 MB
C.1024 MB
D.1524 MB

正解:
Explanation:
References: https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/configure-uefigptbased-hard-drive-partitions

Question No : 6
You have a reference image of the 64-bit version of Windows 10. The reference image contains an application named App1.
You need to ensure that App1 is pinned to the Start menu.
Which tool or tools should you use to apply the custom Start layout to the image?

A.image.exe and Windows Preinstallation Environment (Windows PE)
B.dism.exe and File Explorer
C.Microsoft Application Compatibility Toolkit (ACT)
D.Windows System Image Manager (Windows SIM)

正解:
Explanation:
References: https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/customize-the-startscreen

Question No : 7
You have an image of Windows 10 named Image1.wim. Image1.wim contains a Windows Recovery Environment (Windows RE) image.
You need to add a driver to Windows RE.
Which tool or cmdlet should you use?

A.Express Deployment Tool (EDT) for Windows 10
B.Add-WindowsDriver
C.Windows Imaging and Configuration Designer (Windows ICD)
D.Add-WindowsPackage

正解:
Explanation:
References: https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/customize-windows-re

Question No : 8
HOTSPOT
You are building a Windows Preinstallation Environment (Windows PE) image on a computer named Computer1.
You have an executable file named App1.exe in the C:\Tools\folder. App1.exe is a command line tool that can be run in Windows PE.
You run the following commands on Computer1.
copype.cmd amd64 C:\WinPE dism.exe/Mount-Image/ImageFile:c:\WinPE\media\sources\boot.wim/index:1/MountDir:C:\WinPE\Mount
You need to ensure that you can run App1.exe from Windows PE. App1.exe must be in the root of X: when Windows PE starts.
Which command should you run? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

正解:

Explanation:
References: https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/winpe-mount-andcustomize

Question No : 9
You have a server named Server1 that runs Windows Server 2016. Server1 is located on a network that is disconnected from the Internet.
You have a computer named Computer1 that runs Windows 10.
You download the Windows Assessment and Deployment Kit (Windows ADK) setup on Computer1.
You need to create an installation source on a USB drive that can be used to install Windows ADK on Server1.
Which installation option should you use when you run the Windows ADK setup on Computer1?

A./list
B./layout
C./ceip
D./features
E./installpath

正解:
Explanation:
References: https://technet.microsoft.com/en-gb/library/dn621908.aspx

Question No : 10
This question requires that you evaluate the underlined text to determine if it is correct.
To provide the default product key for OEM activation, you create an answer file by using Windows System Image Manager (Windows SIM), and you add the Microsoft-Windows-Shell-Setup component and the ProductKey component to the generalize pass.
Review the underlined text. If it makes the statement correct, select “No change is needed.” If the statement is incorrect, select the answer choice that makes the statement correct.

A.No change is needed.
B.auditSystem pass
C.specialize pass
D.windowsPE pass

正解:
Explanation:
References: https://docs.microsoft.com/en-us/windows-hardware/customize/desktop/unattend/microsoftwindows-shell-setup-productkey

Question No : 11
You use an answer file to automate the installation of Windows 10. You need to add your company’s support information to computers that you deploy.
Which component should you add to the answer file?

A.Microsoft-Windows-Setup
B.Microsoft-Windows-PnpCustomizationsNonWinPE
C.Microsoft-Windows-Shell-Setup
D.Microsoft-Windows-Deployment

正解:
Explanation:
References: https://docs.microsoft.com/en-us/windows-hardware/customize/desktop/unattend/microsoftwindows-shell-setup-oeminformation

Question No : 12
DRAG DROP
Match the file formats to the corresponding deployment tools. To answer, drag the appropriate file format from the column on the left to its deployment tool on the right.
Each file format may be used once, more than once, or not at all. NOTE: Each correct match is worth one point.

正解:

Question No : 13
You create the working directories for a custom Windows Preinstallation Environment (Windows PE) image.
You need to create an ISO image of Windows PE that can be written to a DVD. The ISO image must be bootable.
Which command should you use?

A.bcdboot.exe
B.oscdimg.exe
C.bootsect.exe
D.etfsboot.exe

正解:
Explanation:
References: https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/oscdimg-command-line-
options

Question No : 14
HOTSPOT
You plan to deploy an image of Windows 10 to several computers by using an answer file.
You need to identify which configuration pass you must use to configure each of the following settings:
- Manufacturer in the Microsoft-Windows-Shell-Setup component.
- UILanguage in the Microsoft-Windows-International-Core component
Which configuration pass should you use for each setting? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

正解:

Question No : 15
You plan to deploy a Windows Preinstallation Environment (Windows PE) image.
Your company uses a graphical application to help installers choose an installation method for Windows 10. The application must be started by using the following command.
installerGui.bat/Full/Interactive You need to configure Windows PE to run the graphical application during startup.
Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

A.Create a [boot loader] section in the INI file and add the command.
B.Create a Boot.ini file in the root folder of the image.
C.Create a Winpeshl.ini file in the \Windows\System32 folder of the image.
D.Create a [LaunchApp] section in the INI file and add the command.
E.Create a [LaunchApps] section in the INI file and add the command.

正解:
Explanation:
References: https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/winpeshlini-referencelaunching-an-app-when-winpe-starts

Microsoft 70-735 問題練習