IT認証試験問題集
毎月、ITshikenは500人以上の受験者が試験準備を助けて、試験に合格するために受験者にご協力します
 ホームページ / 70-740 問題集  / 70-740 問題練習

Microsoft 70-740 問題練習

Installation, Storage, and Compute with Windows Server 2016 試験

最新更新時間: 2019/03/17,合計692問。

実際の問題集を練習し、試験のポイントを了解し、テストに申し込むするかどうかを決めることができます。

さらに試験準備時間の35%を節約するには、70-740 問題集を使用してください。

 / 47

Question No : 1
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server1 that runs Windows Server 2016.
Server1 hosts a line-of-business application named App1. App1 has a memory leak that occasionally causes the application to consume an excessive amount of memory.
You need to log an event in the Application event log whenever App1 consumes more than 4 GB of memory.
Solution: You create a performance counter alert data collector.
Does this meet the goal?

正解:

Question No : 2
You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 contains four virtual machines that are configured as shown in the following table.



To which machine or machines can you connect by using Virtual Machine Connection from Hyper-V Manager?

正解:

Question No : 3
DRAG DROP
You are planning the configuration of a virtual network switch for a Hyper-V environment. The environment will contain the following Hyper-V hosts:
- A server named Server1 will have 10 virtual machines that must be able to communicate with each other. The virtual machines must be prevented from communicating with Server1 and all other servers on the corporate network.
- A two-code failover cluster named Cluster1 will have 20 virtual machines. The virtual machines will run on both nodes. Hyper-V hosts on the corporate network must be able to connect to the virtual machines.
Which type of virtual switch should you select for each Hyper-V host? To answer, drag the appropriate virtual switch types to the correct hosts. Each virtual switch type must be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.



正解:

Question No : 4
DRAG DROP
Your network contains two Hyper-V servers named Server1 and Server2. Server1 has Windows Server 2012 R2 installed. Server2 has Windows Server 2016 installed.
You perform a live migration of a virtual machine named VM1 from Server1 to Server2.
You need to create a production checkpoint for VM1 on Server2.
Which three Windows PowerShell cmdlets should you run in sequence? To answer, move the appropriate Windows PowerShell cmdlets from the list of actions to the answer area and arrange them in the correct order.



正解:

Question No : 5
You have a Hyper-V host that runs Windows Server 2016. The host contains a virtual machine named VM1. VM1 has resource metering enabled. You need to use resource metering to track the amount of network traffic that VM1 sends to the 10.0.0.0/8 network.
Which cmdlet should you run?

正解:

Question No : 6
You have a server named Server 1 that runs Windows Server 2016 and has the Hyper-V server role installed.
On Server1, you plan to create a virtual machine named VM1.
You need to ensure that you can start VM1 from the network.
What are two possible ways to achieve the goal? Each correct answer presents a complete solution.

正解:

Question No : 7
You have a server named Server 1 thai runs Windows Server 2016.
Server 1 has Internet connectivity
You have a Nano Server image.
You need to download and save a Nano Server package in the Nano Server image. The package is NOT included in the Windows Server 2016 installation media.
Which two cmdlets should you run on Server1.

正解:

Question No : 8
You have a server named Server1 that runs Windows Server 2016. You need to install the DNS Server role on Server1.
What should you run?

正解:

Question No : 9
DRAG DROP
You have a network that contains several servers that run Windows Server 2016.
You need to use Desired State Configuration (DSC) to configure the servers to meet the following requirements:
- Install the Web Server server role
- Start the World Wide Web Publishing service.
How should you configure the DSC resources? To answer, drag the appropriate values to the correct locations. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.



正解:

Question No : 10
You have a server named Server1 that runs Windows Server 2016.
The Windows Server 2016 installation media is mounted as drive D.
You copy the NanoServerImageGenerator folder from the D:\NanoServer folder to the C:\NanoServer folder.
You need to create a custom Nano Server image that includes the Hyper-V server role. The image will be used to deploy Nano Servers to physical servers.
Which two commands should you run? Each correct answer presents part of the solution.

正解:

Question No : 11
Your network contains a new Active Directory domain named contoso.com.
You have a security policy that states that new servers should run Nano Server whenever possible.
Which server role can be deployed on a Nano Server?

正解:

Question No : 12
HOTSPOT
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
A company named Contoso, Ltd. has several servers that run Windows Server 2016. Contoso has a Hyper-V environment that uses failover clustering and Windows Server Update Services (WSUS). The environment contains several Windows containers and several virtual machines.
The WSUS deployment contains one upstream server that is located on the company’s perimeter network and several downstream servers located on the internal network. A firewall separates the upstream server from the downstream servers.
You plan to deploy a human resources application to a new server named HRServer5. HRServer5 contains a FAT32-formatted data volume.
The CIO of Contoso identifies the following requirements for the company’s IT department:
- Deploy a failover cluster to two new virtual machines.
- Store all application databases by using Encrypted File System (EFS).
- Ensure that each Windows container has a dedicated IP address assigned by a DHCP server.
- Produce a report that lists the processor time used by all of the processes on a server named Server1 for five hours.
- Encrypt all communication between the internal network and the perimeter network, including all WSUS communications.
- Automatically load balance the virtual machines hosted in the Hyper-V cluster when processor utilization exceeds 70 percent.
You need to create a Data Collector Set to meet the requirement for the processor time report.
What command should you run to create the Data Collector Set? To answer, select the appropriate options in the answer area.



正解:

Question No : 13
Note This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Start of Repeated Scenario:
A company named Contoso, ltd. has several servers that run Windows Server 2016 Contoso has a Hyper V environment that uses failover clustering and Windows Server Update Services (WSUS). The environment contains several Windows containers and several virtual machines.
The WSUS deployment contains one upstream server that is located on the company's perimeter network and several downstream servers located on the internal network, A firewall separates the upstream server from the downstream servers.
You plan to deploy a human resources application to a new server named HRServer5. HRServer5 contains a FAT32-formatted data volume.
The CIO of Contoso identifies the following requirements for the company's IT department:
• Deploy failover cluster to two new virtual machines.
• Store all application databases by using Encrypted File System (EFS).
• Ensure that each Windows container has a dedicated IP address assigned by a DHCP server
• Produce a report that lists the processor time used by all of the processes on a server named Server 1 for five hour.
Encrypt all communication between the internal network and the perimeter network, including all WSUS communications.
• Automatically load balance the virtual machines hosted in the Hyper-V cluster when processor utilization exceeds 70 percent.
End of Repeated Scenario.
What should you do to prepare the data volume on HRServer5 to store the databases required for the human resources application?

正解:

Question No : 14
Note This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Start of Repeated Scenario:
A company named Contoso, ltd. has several servers that run Windows Server 2016 Contoso has a Hyper V environment that uses failover clustering and Windows Server Update Services (WSUS). The environment contains several Windows containers and several virtual machines.
The WSUS deployment contains one upstream server that is located on the company's perimeter network and several downstream servers located on the internal network, A firewall separates the upstream server from the downstream servers.
You plan to deploy a human resources application to a new server named HRServer5. HRServer5 contains a FAT32-formatted data volume.
The CIO of Contoso identifies the following requirements for the company's IT department:
• Deploy failover cluster to two new virtual machines.
• Store all application databases by using Encrypted File System (EFS).
• Ensure that each Windows container has a dedicated IP address assigned by a DHCP server
• Produce a report that lists the processor time used by all of the processes on a server named Server 1 for five hour.
Encrypt all communication between the internal network and the perimeter network, including all WSUS communications.
• Automatically load balance the virtual machines hosted in the Hyper-V cluster when processor utilization exceeds 70 percent.
End of Repeated Scenario.
You need to modify the Hyper V cluster to meet the load balancing requirement for the virtual machine.
Which command should you run?

正解:

Question No : 15
Note This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Start of Repeated Scenario:
Your network contains an Active Directory domain named contoso.com The functional level of the forest and the domain is Windows Server 2008 R2 All servers in the domain run Windows Server 2016 Standard. The domain contains 300 client computers that run either Windows 8.1 or Windows 10.
The domain contains nine servers that are configured as shown in the following table.



The virtual machines are configured as follows:
• E ach virtual machine has one virtual network adapter
• VM1 and VM2 are part of a Network Load Balancing (NIB) cluster.
• All of the servers on the network can communicate with all of the virtual machines.
End of repeated Scenario.
You need to minimize the likelihood that a virtual machine running malicious code will consume excessive resources on Server5.
What should you do?

正解:

 / 47