IT認証試験問題集
毎月、ITshikenは1500人以上の受験者が試験準備を助けて、試験に合格するために受験者にご協力します
 ホームページ / MB-320 問題集  / MB-320 問題練習

Microsoft MB-320 問題練習

Microsoft Dynamics 365 Supply Chain Management, Manufacturing 試験

最新更新時間: 2021/01/06,合計83問。

2021新年のギフト:MB-320 最新真題を買う時、日本語版と英語版両方を同時に獲得できます。

実際の問題集を練習し、試験のポイントを了解し、テストに申し込むするかどうかを決めることができます。

さらに試験準備時間の35%を節約するには、MB-320 問題集を使用してください。

 / 6

Question No : 1
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A company uses Dynamics 365 Supply Chain Management to manage production configuration. A product designer creates a remote control toy that can be purchased with different tire sizes. Sales representatives need to perform product configuration for the custom tire variants when they create a new order.
Solution: Select the custom tire size when filling out the item requirement line.
Does the solution meet the goal?

正解:

Question No : 2
HOTSPOT
An inventory control clerk manages adjustments in inventory. Some adjustments have a cost impact. Other adjustments must be posted to a specific ledger account or must be registered in inventory. You need to configure the system.
Which journal types should you use? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.



正解:


Explanation:
Reference: https://community.dynamics.com/ax/b/abhijeethelestheaxeffect/posts/movement-journal-in-ax-2012-r3

Question No : 3
A company manufactures and sells speaker boxes. The speaker boxes can be silver or black with a basic or upgraded wiring harness assembly. The speaker box must be created in the item master so the variables for colors and harness type can be assigned at order entry.
You need to create a new item that supports multiple variables.
What should you do?

正解:

Question No : 4
DRAG DROP
A company uses separate finished good item numbers for size variations of the same product. The company wants to minimize the number of variously-sized items that are created. You need to perform the setup to allow variants in size to the product master.
Which five actions should you perform in sequence? To answer, move the appropriate actions from the list
of actions to the answer area and arrange them in the correct order.



正解:


Explanation:
Reference: https://gfeaxblog.wordpress.com/2017/09/28/o365-how-to-create-product-masters/

Question No : 5
A company produces pipe at certain fixed lengths.
The company must be able to schedule cutting machines. You set up the cutting machines as resources. All cutting resources can produce many of the products. There are some products that require cutting machines that can produce longer lengths of product. Only some of the machines can do this.
You need to configure the resources to account for these different products.
What should you do?

正解:
Explanation:
Reference: https://docs.microsoft.com/en-us/dynamics365/supply-chain/production-control/tasks/define-resource­capabilities

Question No : 6
DRAG DROP
A company produces custom-made bicycles that offer many different configurations.
Your standard bicycle, B-0001, is made with many common components such as a frame and wheels. Customers can choose between two frames: F-0001 or F-0009. Wheel W-0001 is only compatible with frame F-0001.
You create the following configuration groups: Frames, Wheels.
You need to ensure that users can only select valid combinations of frames and wheels.
In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order.



正解:


Explanation:
Reference: https://docs.microsoft.com/en-us/dynamics365/supply-chain/pim/dimension-based-product-configuration

Question No : 7
You are the production supervisor in charge of setting effective cost prices for the labor force in a manufacturing company.
It is the end of the year and the labor rates have been recalculated based on new salary data. You need to update the effective labor costs for all labor groups.
Which element must be updated?

正解:

Question No : 8
DRAG DROP
You are the product definition manager for a car manufacturing company. You set up and maintain the production configuration models used at the company.
You must build a new configuration model and include constraints in the model.
You need to determine which constraint type to use for each scenario.
Which constraint type should you use? To answer, drag the appropriate constraint types to the correct scenarios. Each constraint type may be used once, more than once, or not at all. You may need to drag the split bat between panes or scroll to view content. NOTE: Each correct selection is worth one point.



正解:


Explanation:
Reference: https://docs.microsoft.com/en-us/dynamics365/supply-chain/pim/build-product-configuration-model

Question No : 9
HOTSPOT
A company implements Dynamics 365 Finance and Operations.
You need to ensure that cost roll-ups and sales price calculations are configured for the scenario.
Which options should you use? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.



正解:


Explanation:
Reference: https://docs.microsoft.com/en-us/dynamics365/supply-chain/cost-management/bom-calculations

Question No : 10
HOTSPOT
A company makes engine parts used in the automotive industry.
They are in the process of retooling an existing manufacturing plant. They are looking to use Dynamics 365 Supply Chain Management to help support the Bill of Materials (BOM) product lifecycle for engineering version control.
You must translate existing production processes into the proper elements. You need to create BOM lifecycle states to translate existing production processes into the proper elements.
What type of BOM product lifecycle state should you create? To answer, select the appropriate BOM state in the answer area.



正解:


Explanation:
Reference: https://docs.microsoft.com/en-us/dynamics365/supply-chain/production-control/bill-of-material-bom

Question No : 11
DRAG DROP
A company overstates on-hand raw materials due to the time it takes to post raw materials when production orders are processed.
All items used to manufacture finished goods must be consumed when a finished good is reported as finished. You must not change all bill of materials lines to use the option of flushing principal.
You need to ensure that all production orders consume raw materials at Report as finished.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.



正解:


Explanation:
Reference: https://docs.microsoft.com/en-us/dynamics365/supply-chain/production-control/production-parameters­manufacturing-execution

Question No : 12
A company produces multiple products that require an installation kit that includes 50 components.
The company does not want to include these 50 components in every Bill of materials (BOM). You have a BOM kit that includes all 50 components, but you do not want it to produce a separate production order. You need to set up the product BOM for the finished good.
What should you do?

正解:

Question No : 13
DRAG DROP
A company plans to account for indirect costs related to materials used to manufacture products.
The items used to manufacture products have surcharge rates that depend on the type of product being used. You need to set up the costing sheet to include surcharges for specific items.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.



正解:

Question No : 14
A company makes lubricants and greases used in the automotive industry.
They are planning to use Dynamics 365 Supply Chain Management to make products whose characteristics can be tracked throughout the production process and are associated with the packaged product. You need to identify which production methodology to use.
Which production methodology should you use?

正解:

Question No : 15
DRAG DROP
A company makes lubricants and greases used in the automotive industry. The company plans to implement Dynamics 365 Supply Chain Management.
The system must meet the following requirements:
- Schedule the batch production of products.
- Plan for inventory fluctuations of ingredients that are used across different products.
- Schedule delivery of amounts of proprietary compounds used during production from vendors to keep production runs on schedule and eliminating excess stock on hand or delayed production.
The company is starting the initial setup of their Dynamics 365 environment.
You need to perform the initial setup of the environment.
Where would you need to set up the following items? To answer, drag the appropriate setting to the correct drop targets. Each source may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.



正解:

 / 6