IT認証試験問題集
毎月、ITshikenは1500人以上の受験者が試験準備を助けて、試験に合格するために受験者にご協力します
 ホームページ / MS-200 問題集  / MS-200 問題練習

Microsoft MS-200 問題練習

Planning and Configuring a Messaging Platform 試験

最新更新時間: 2021/01/13,合計65問。

2021新年のギフト:MS-200 最新真題を買う時、日本語版と英語版両方を同時に獲得できます。

実際の問題集を練習し、試験のポイントを了解し、テストに申し込むするかどうかを決めることができます。

さらに試験準備時間の35%を節約するには、MS-200 問題集を使用してください。

 / 5

Question No : 1
You plan to deploy a Microsoft Exchange Server 2019 organization that will contain the servers shown in the following table.



The sites connect to each other by using a high-cost, slow WAN link. Each site also connects directly to the Internet.
You need to ensure that outgoing email to the Internet always uses a server in the local site.
What should you create?

正解:

Question No : 2
You manage a Microsoft Exchange Server 2019 organization that sends 100,000 email messages
to the Internet daily. The messages are routed through a single smart host by using a single Send connector that has an address space of *.
Your network contains an Active Directory site named Site01 that has all the Exchange servers. You have a disaster recovery site named Site02 that has several SMTP servers. The smart host fails. You need to deliver queued messages to the Internet as quickly as possible.
What should you do?

正解:

Question No : 3
Your company has a Microsoft Exchange Server 2019 organization.
The company’s IT department has a monitoring application that generates email message alerts.
You need to configure Exchange to accept messages from the monitoring application. The solution must ensure that messages are accepted regardless of their size. You create a new Receive connector scoped to the IP address of the server used by the monitoring application.
Which two actions should you perform next? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

正解:
Explanation:
References: https://docs.microsoft.com/en-us/exchange/mail-flow/connectors/allow-anonymous­relay?view=exchserver-2019

Question No : 4
You have a Microsoft Exchange Server 2019 organization named contoso.com.
You need to ensure that all email sent between contoso.com and an Exchange organization named litwareinc.com is protected by using TLS encryption.
Which three actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

正解:

Question No : 5
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your company has two offices.
The network contains an Active Directory forest. The forest contains two domains. Each office is configured as an Active Directory site.
You need to recommend a plan for the deployment of Microsoft Exchnage Server 2019 servers. The plan must ensure that a copy of each sent email message is always retained in a shadow queue.
Solution: You recommend deploying a standalone server to each site. Each server will be in a different domain.
Does this meet the goal?

正解:
Explanation:
References: https://docs.microsoft.com/en-us/exchange/mail-flow/transport-high-availability/shadow­redundancy? view=exchserver-2019

Question No : 6
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your company has two offices.
The network contains an Active Directory forest. The forest contains two domains. Each office is configured as an Active Directory site.
You need to recommend a plan for the deployment of Microsoft Exchnage Server 2019 servers. The plan must ensure that a copy of each sent email message is always retained in a shadow queue.
Solution: You recommend deploying a database availability group (DAG) that will contain two servers. Each server will be in a different site. Both servers will be in the same domain.
Does this meet the goal?

正解:
Explanation:
References: https://docs.microsoft.com/en-us/exchange/mail-flow/transport-high-availability/shadow­redundancy? view=exchserver-2019

Question No : 7
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these
questions will not appear in the review screen.
Your company has two offices.
The network contains an Active Directory forest. The forest contains two domains. Each office is configured as an Active Directory site. You need to recommend a plan for the deployment of Microsoft Exchange Server 2019 servers.
The plan must ensure that a copy of each sent email message is always retained in a shadow queue.
Solution: You recommend deploying two standalone servers. Each server will be in a different site.
Both servers will be in the same domain.
Does this meet the goal?

正解:
Explanation:
References: https://docs.microsoft.com/en-us/exchange/mail-flow/transport-high-availability/shadow­redundancy? view=exchserver-2019

Question No : 8
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your company has a Microsoft Exchange Server 2019 server named EX01. EX01 has the default Receive connectors. EX01 receives Internet email on port 25 from an appliance in the company’s perimeter network.
The company has an application named App1 that can only send email on port 25. The application administrator requests that you enable App1 to route email through EX01 for delivery. You need to ensure that EX01 only accepts email from the appliance and App1.
Solution: You add a second IP address to EX01. You create a new linked connector named App1 EX01.
Does this meet the goal?

正解:
Explanation:
References: https://docs.microsoft.com/en-us/exchange/mail-flow/mail-routing/mail-routing?view=exchserver-

Question No : 9
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your company has a Microsoft Exchange Server 2019 server named EX01. EX01 has the default Receive connectors. EX01 receives Internet email on port 25 from an appliance in the company’s perimeter network. The company has an application named App1 that can only send email on port 25. The application administrator requests that you enable App1 to route email through EX01 for delivery. You need to ensure that EX01 only accepts email from the appliance and App1.
Solution: You modify the remote IP address ranges of the default frontend Receive connector.
Does this meet the goal?

正解:
Explanation:
References: https://docs.microsoft.com/en-us/exchange/mail-flow/connectors/receive-
connectors?view=exchserver-2019

Question No : 10
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these Qu estions will not appear in the review screen.
Your company has a Microsoft Exchange Server 2019 server named EX01. EX01 has the default Receive connectors. EX01 receives Internet email on port 25 from an appliance in the company’s perimeter network.
The company has an application named App1 that can only send email on port 25. The application
administrator requests that you enable App1 to route email through EX01 for delivery. You need to ensure that EX01 only accepts email from the appliance and App1.
Solution: You create a new remote domain and set the domain name to App1. You create a new delivery agent connector and set the IsScopedConnector property to $true.
Does this meet the goal?

正解:

Question No : 11
Your company has offices in New York and Los Angeles. Each office has a Mailbox server.
The company has a Microsoft Exchange Server 2019 hybrid deployment that uses a namespace of litware.com. Currently, all email messages received from the Internet are routed from Exchange Online to the New York office.
You need to ensure that messages sent to users in the Los Angeles office are routed from Exchange Online directly to the local Mailbox server in the Los Angeles office.
What should you create in Exchange Online?

正解:

Question No : 12
You are deploying Microsoft Exchange Server 2019 to two data centers in Paris and London. The Paris data center contains a file server named PAR-FILE01 and three Mailbox servers named PAR-MBX01, PAR-MBX02 and PAR-MBX03. The London data center contains a file server named LON-FILE01 and three Mailbox servers named LON-MBX01, LON-MBX02, and LON­MBX03.
You create a database availability group (DAG) that contains all six Mailbox servers and has PAR­FILE01 as a primary witness.
You need to set LON-FILE01 as the alternate witness.
Which cmdlet should you run?

正解:
Explanation:
References: https://docs.microsoft.com/en-us/powershell/module/exchange/database-availability­groups/setdatabaseavailabilitygroup?view=exchange-ps

Question No : 13
You are deploying Microsoft Exchange Server 2019 to two data centers.
You need to protect all mailbox content against database corruption. The solution must minimize the recovery time objective (RTO) and the recovery point objective (RPO).
What is the best way to achieve the goal? More than one answer choice may achieve the goal. Select the BEST answer.

正解:

Question No : 14
You have a Microsoft Exchange Server 2019 database availability group (DAG) named DAG1. DAG1 contains a Mailbox server named EX01. EX01 fails and must be replaced. You plan to recover EX01 to a new server. You deploy Windows Server 2019 to a new server that has identical hardware as EX01. You need to restore EX01 to the new server.
What should you do before you restore EX01?

正解:
Explanation:
Before you restore EX01 to the new server you must reset the computer account for EX01 and then join it to the domain.
References: https://docs.microsoft.com/en-us/exchange/high-availability/disaster-recovery/recover-exchange­servers? view=exchserver-2019

Question No : 15
HOTSPOT
Your network contains an Active Directory forest.
The forest contains the servers in the following table.



The dmz.litware.com domain contains mail-enabled user accounts but does not contain any Exchange servers. You plan to replace the existing Exchange servers with new servers that have Exchange Server 2019 installed.
You need to extend the schema and prepare the Active Directory domains.
What should you do? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.



正解:

 / 5